We have for our client commercial Daliya Machine that have fully machined & balanced beaters. These commercial Daliya Machine are popular for continuous crushing and suitable for making daliya. Offered in compact size commercial Daliya Machine do not require too much space.

The different standard accessories available with Daliya Machine: -
*Set of 3 perforated round hole Stainless Steel screens are supplied with Daliya Machine-
*Motor Pulley

Operating Principle of Daliya pulverizer

The flow of material from the feeding hopper is regulating by means of side handle easily to suit the load. Rotor runs in anti-clockwise direction. The beaters pass just beneath the Ratchet Teeth Liner fitted inside the top half of the crushing chamber, leaving a gap of 3 mm between the liner teeth and the tips of the rotating beaters. This cuts the material caught between the liner teeth like a sword with a scissors action at a 450 R.P.M. After the required size reduction, the material will pass through the screen fitted inside the lower discharge end of the grinding chamber. No sieving is required, as the appropriate size screen fitted will not allow coarser material to pass through. The air generated in the crushing chamber forces the powder to pass through the screen fitted at the bottom discharge end of the crushing chamber, into a Filter attached to the delivery trough below. (When crushing Wet-Pulpy materials, the balloon should not be use)

Key Features of Daliya Making pulverizer :

• Unique and Reliable Design
  • The Daliya series pulverizer are highly effective as well as non stop continuous daliya producing process.
• All contacting Parts are Stainless Steel & Aluminum no corrosions hazards
• Increased production leading to faster return on the investments

• All Rotating parts are dynamical balanced for less vibration & higher performances.

• low temperature grinding technology thus the original ingredient cannot destroy.

Servicing Guidelines of Daliya making pulverizer :-

Open the cover of chamber all grinding parts cleaned with a brush in couple of minute and the Pulverizer is ready for next crushing. If required, the grinding chamber can also be wash with water. Remove the cotton balloon and the screen, close the cover tightly and start the grinder. Now pour a bucket or two of water into the hopper. The grinding parts will be flushed with the water and cleaned. Continue running the machine for a few more minutes as the draft of the fresh air sucked into the grinder will dry it. The beater when worm out removed and reserved by removing the cur clip lock holding to the rotor pins. When both the edges are worm out, they sharpened on an emery stone, to be use as new. In addition, when completely warn out, replaced the equal weight and refitted.

Standard Accessories of daliya pulverizer

• Three Set of perforated round hole Screens
• Easy movable hopper helps you to ensure continuous and steady feed to the machine. Very useful where feed material is to be manually dumped from bags.
• Motor Pulley
• Mid Steel Fabricated Foundation Plate with adjustable rail for motor.
• Two Numbers of cotton balloon.

Extra Accessories of Daliya Making pulverizer

• suitable totally enclosed fan cooled single or three phase Sq. cage motor as per IS: 325 or 996 is supplied with mono pulverizer {Electricity (Special power can be accommodated): 220/380/415 V0lts, 50/60 Hz , 3 Phase }
• Suitable miniature circuit breaker as per IS: 8828 with 3 meter cable & 3 pin top as per IS: 1293 are supplied with Daliya Machine as extra cost.
• 3 meter 4 core cable, starter, ampere meter, capacitor, are supplied with daliya machine at extra cost.
• All contacting parts Stainless steel 304 / 316 can be accomodated

Application of Daliya Making pulverizer

The Techno Wings Daliya Making pulverizer are used for a producing daliya.

Construction of Daliya Making pulverizer

commercial Daliya Machine is made from heavy duty cast iron base. Cast iron oil chamber housings for long life of bearings. Aluminum Grinding Chamber lined with serrated Stainless Steel plates, which protects the body from wear and tear. Grinding done by a set of Stainless Fixed better on a balanced rotor. A screen classifier forms the lower half of the grinding chamber.