Gravy Machine

We have for our client commercial Gravy Machine that have fully machined & balanced beaters. These commercial Gravy Machine are popular for continuous crushing and suitable for wet-pulpy. Offered in compact size commercial Gravy Machine do not require too much space. Our commercial Gravy Machines are used for grinding different types of product like Tomato, fresh ginger, onion, garlic, sugar, fresh fruits, vegetables, beetle nuts, leaves, Wet rice, wet pulses, wet dal, and allied food production.

Key Features of Gravy Machine

• Unique and Reliable Design
  • The Wet series Pulverizer are highly effective as well as non stop continuous pulverizing process.
• All contacting parts are aluminum & stainless steel no corrosion hazards
• Gravy Machine is not required any V belts thus less friction losses.
• Increased production leading to faster return on the investments
• All Rotating parts are dynamically balanced for less vibration & higher performances.
• Low temperature grinding technology thus the original ingredient cannot destroy.

Available model of Gravy Machine

Model No	Techno 1102	Techno 1103
Chamber Size	200 mm X 100 MM	200 mm X 200 MM
Pulverizer's RPM	2880	2880
Motor H.P. ( KW.)	1 H.P. (0.75 Kw.)	2 H.P. ( 1.5 Kw.)
Pulverizer's Dimensions	56 X 32 X 77 CM 46 Kg. Approximate	62 X 32 X 77 CM 65 Kg. Approximate

Standard Accessories of Gravy Machine

• Four numbers of Screens
• Suitable three phase or Single Phase Sq. cage motor {Electricity (Special power can be accommodated): 110/220/380/415 Volts, 50 Hz , 1/3 Phase }.
• Three meter cable Suitable miniature circuit breaker as per IS: 8828 with 3 meter cable & 3 pin top as per IS: 1293 for single Phase Electric Motors.
• starters, main switch, ampere meter, capacitor for Three Phase Electric Motor.

Application of Gravy Machine

Gravy Machine are exclusively meant for the grinding of wet dal ( pulses ) for dal vada, tomato, wet & dry chili, onion, almonds, cashew, ginger, garlic, and many more...

Construction of Wet Pulverizer

Wet Pulverizer Made from heavy duty Stainless Steel fabricated body. Stainless Steel Grinding Chamber lined with serrated wear stainless Steel plates, which protects the body from wear and tear. Grinding done by a set of Fixed better on a balanced rotor. A screen classifier forms the lower half of the grinding chamber.

Operations of Wet Pulverizer

The flow of material from the Feeding Hopper is regulating by means of side handle easily to suit the load. Rotor runs in anti-clockwise direction. The beaters pass just beneath the Ratchet Teeth Liner fitted inside the top half of the crushing chamber, leaving a gap of 3 mm between the liner teeth and the tips of the rotating beaters. This cuts the material caught between the liner teeth like a sword with a scissors action at a 2880 RPM After the required size reduction, the material will pass through the screen fitted inside the lower discharge end of the grinding chamber. No sieving is required, as the appropriate size screen fitted will not allow coarser material to pass through. The air generated in the crushing chamber forces the powder to pass through the screen fitted at the bottom discharge end of the crushing chamber, into a Filter attached to the delivery trough below. (When crushing Wet-Pulpy materials, the balloon should not be use)

Servicing Guidelines of Gravy Machine

Open the cover of chamber all grinding parts cleaned with a brush in couple of minute and the Pulverizer is ready for next crushing. If required, the grinding chamber can also be wash with water. Remove the cotton balloon and the screen, close the cover tightly and start the Pulverizer. Now pour a bucket or two of water into the hopper. The grinding parts will be flushed with the water and cleaned. Continue running the machine for a few more minutes as the draft of the fresh air sucked into the Pulverizer will dry it.

Click for Estimated Price