Industrial Pulverizers and hammer Mills

Industrial Pulverizers and hammer Mills
See larger image

We have a wide range of Mini pulverizer's that are designed and manufactured to yield maximum efficiency to our clients. These pulverizers are used for pulverizing, crushing and grinding different types of spices, vegetables, pigments, herbs and other food products. Available at competitive rates, these pulverizers are known for their efficiency and durability.
Our Techno wings brand Mini pulverizers are available in two type

  1. Standard Model Mini Pulverizer
  2. Water Jacketed Mini Pulverizer

Whether your application is small, large, straightforward or problematic, Techno can produce it with unequalled cost effectiveness.

Jacketed Mini pulverizers(mini Pulverizer with water circulating system)

Jacketed Mini pulverizers(mini Pulverizer with water cerculating system)
See larger image

Picture Gallery of Jacketed Mini pulverizers
Download Pdf Jacketed Mini pulverizers(mini Pulverizer with water cerculating system)
With a unique and reliable design, the Mini series can pulverize salt, coffee, sugar, fresh fruits, vegetables, herbs, tobacco, cattle and poultry feeds, dry leaves, seeds, and other food products also. This machine is suitable for small & Medium business.
Avail from us, a wide array of Techno Wings Brand mini pulverizer that is designed to offer effective and continuous grinding. These products are applicable for various spices, fresh fruits, garlic, coffee, sugar, herbs, vegetables, poultry feeds, custard powder, sugar and various other allied food.

Operating Principle of Water Jacketed Mini pulverizer

The flow of material from the feeding hopper is regulating by means of a vertical adjustable slide to suit the load. Rotor with four beaters runs in anti-clockwise direction. The swinging beaters pass just beneath the ratchet teeth liner fitted inside the top half of the crushing chamber, leaving a gap of 3 to 4 mm between the liner teeth and the tips of the rotating beaters. This cuts the material caught between the liner teeth like a sword with a scissors action at a high speed of 2800 rotations per minute.
After the required size reduction, the material will pass through the screen fitted inside the lower discharge end of the grinding chamber. No sieving is required, as the appropriate size screen fitted will not allow coarser material to pass through. The air generated in the crushing chamber forces the powder to pass through the screen fitted at the bottom discharge end of the crushing chamber, into a cotton bag attached to the delivery trough below. The dust is collect through the attached balloon fitted on the discharge end. The top closed end of the balloon may suspend from the roof or a wall of the building. Every half an hour, the balloon should be tap to knock down the dust clogging the pores of the balloon, thus releasing the pressure built-up. The dust falls in the bag below, and thus a dust free operation without wastage of product achieve. (when crushing wet-pulpy materials, the balloon should not be use).

Servicing Guidelines of Water Jacketed Mini pulverizer

Open the cover of chamber all grinding parts clean with a brush in couple of minute and the pulverizer is ready for next grinding. If required, the grinding chamber can also be wash with water. Remove the cotton balloon and the screen, close the cover tightly and start the grinder. Now pour a bucket or two of water into the hopper. The grinding parts will be flushed with the water and cleaned. Continue running the machine for a few more minutes as the draft of the fresh air sucked into the grinder will dry it. When the beater worm out removing and reserved by removing the cur clip lock holding to the rotor pins. When both the edges are worm outs, they sharpened on an emery stone, to use as new. In addition, when completely warn out, replace the equal weight and refitted.

Key Features of Water Jacketed Mini pulverizer

  • Unique and Reliable Design
    • The Water Jacketed Mini pulverizer series pulverizers are highly effective as well as non stop continuous pulverizing process.
  • The chamber is kept cool by circulating cool water through the built-in water jacket.
  • Compact size
  • Dust free operation
  • Ideal for dry crushing
  • Increased production leading to faster return on the investments.
  • Hardened & fully machined beaters thus less wear & tear.
  • Single pieces grinding chamber no separate joints of fabrication for out late.

Standard Accessories of Water Jacketed Mini pulverizer

  • Motor pulley
  • One number cotton balloon.
  • Easy movable trolley with adjustable rail for motor
  • Five numbers perforated round holes screen

Extra Accessories of Water Jacketed Mini pulverizer

  • Suitable totally enclosed fan cooled single or three phase Sq. cage motor as per IS: 325 or 996 (Special power can be accommodated): 220/380/415 Volts, 50/60 Hz, 3 Phase )
  • Suitable miniature circuit breaker as per IS: 8828 with 3 meter cable & 3 pin top as per IS: 1293
  • V Belts
  • Contacting Parts Stainless steel 304 / 316 can can be accommodated

Application of Water Jacketed Mini pulverizer

The Techno wings Mini pulverizers are widely used for grinding of both dry/wet spices, green chilly, fresh ginger, garlic, fresh fruits, vegetables. These machines can also be used as a fruit finisher. The Techno wings Mini pulverizer can also be used for the following dry applications like agricultural chemicals, broken biscuits (hi-fat/low fat), custard powder coffee, charcoal, dals, dyes & pigments, fillers, henna leaves, herbs, leaves and roots instant foods insecticides and pesticides, kaolin molding powders, pharmaceuticals, plastics, poultry feed & marine feed, resins, sugar (biscuit grade/icing grade), separates, tea etc

Construction of Water Jacketed Mini pulverizer

Water Jacketed Mini pulverizer is Made from Cast Iron body. Grinding Chamber lined with serrated wear plates, which protects the body from wear and tear. Grinding done by a set of swinging four numbers inter changeable and reversible beater on a balanced rotor which is fitted on suitable electric motor's shaft. A screen classifier forms the lower half of the grinding chamber.

Available models of Water Jacketed Mini pulverizer


Model Number TW-4 Super TW-5 Super TW-6 Super
Chamber size
DIA X WIDTH
Ø 08 Inch x 3 Inch
Ø 200 mm X 75 mm
Ø 10 Inch x 4 Inch
Ø 250 mm X 100 mm
Ø 12 Inch x 6 Inch
Ø 300 mm X 150 mm
Required Motor 2 H.P. ( 1.5 KW) 5 or 7 .5 7.5 or 10
Grinding Speed (Machine RPM) 5000 5000 5000
fineness Range 2-100 mesh

Click for Estimated Price

Note:-

Due to continuous improvements, we reserve the rights to alter and/or amend dimensions/design without prior notice.
The Figure for capacities given are for guideline only may very force case to case and depending many factors.
This document was last modified on: by Techno Agencies (admin@pulverizerindia.com)

 

Contact Us

Techno Agencies
84, Shree Hari Industrial Estate,
Panna Estate Road, Rakhial, Ahmedabad
Gujarat
India
Postal code: 380023

E Mail:- admin@pulverizerindia.com
Phone:- +91-79-22743454
Fax:- +91-79-22745062
Mobile:- +91-9426088680

Recommended for you: