We have for our client commercial wet & dry grinders that have hardened as well as fully machined & balanced beaters. These grinders are popular for continuous crushing and suitable for wet-pulpy and dry crushing. Offered in compact size wet & dry grinders do not require too much space. Our commercial wet and dry grinders are used for grinding different types of product like spices, fresh ginger, salt, garlic, sugar, fresh fruits, vegetables, beetle nuts, leaves, oil cake, cattle and poultry feeds, icing sugar, costarred powder, instant food, food colors and allied food production.

The different standard accessories available with Dry & Wet pulverizer : -
*Set of 7 perforated round hole screens are supplied with Dry & Wet Grinder
* 3-meter cable with plug with miniature circuit breaker along with ampere meter will be fitted for overload protection for motor
*One filter

Key Features of Dry & Wet pulverizer :

• Unique and Reliable Design
  • The Dry & Wet series pulverizer are highly effective as well as non stop continuous pulverizing process.
• All contacting Parts are Aluminum & Stainless Steel no corosone hazzerds
• Spice Mill is not required any V belts thus less firction losses.
• Increased production leading to faster return on the investments
• All Rotating parts are dynamical balanced for less vibration & higer performacnces.
• low temperature grinding technology thus the original ingredient cannot destroy.

Operations of Dry & Wet pulverizer : -

The flow of material from the Feeding Hopper is regulating by means of side handle easily to suit the load. Rotor runs in anti-clockwise direction. The beaters pass just beneath the Ratchet Teeth Liner fitted inside the top half of the crushing chamber, leaving a gap of 3 mm between the liner teeth and the tips of the rotating beaters. This cuts the material caught between the liner teeth like a sword with a scissors action at a 2880 R.P.M. After the required size reduction, the material will pass through the screen fitted inside the lower discharge end of the grinding chamber. No sieving is required, as the appropriate size screen fitted will not allow coarser material to pass through. The air generated in the crushing chamber forces the powder to pass through the screen fitted at the bottom discharge end of the crushing chamber, into a Filter attached to the delivery trough below. (When crushing Wet-Pulpy materials, the balloon should not be use)

Servicing Guidelines of Dry & Wet grinding pulverizer :-

Open the cover of chamber all grinding parts cleaned with a brush in couple of minute and the pulverizer is ready for next crushing. If required, the grinding chamber can also be wash with water. Remove the cotton balloon and the screen, close the cover tightly and start the grinder. Now pour a bucket or two of water into the hopper. The grinding parts will be flushed with the water and cleaned. Continue running the machine for a few more minutes as the draft of the fresh air sucked into the grinder will dry it. The beater when worm out removed and reserved by removing the cur clip lock holding to the rotor pins. When both the edges are worm out, they sharpened on an emery stone, to be use as new. In addition, when completely warn out, replaced the equal weight and refitted.

Standard Accessories of Dry & Wet pulverizer

• one Number Filter.
• seven numbers of Screen
• 1 Numbers of Ampere Meter
• Suitable three phase or Single Phase Sq. cage motor {Electricity (Special power can be accommodated): 220/380/415 V0lts, 50/60 Hz, 3 Phase }.
• Three meter cable Suitable miniature circuit breaker as per IS: 8828 with 3 meter cable & 3 pin top as per IS: 1293 for single Phase Electric Motors.
• Three meter four core cable with starters, & ampere meter, for Three Phase Electric Motor.

Extra Accessories of Dry & Wet pulverizer

• main switch, capacitor For three phase
• All Contacting Parts Stainless Steel 304 / 316 can be accommodated

Application of Dry & Wet pulverizer

Dry & Wet grinding pulverizer are exclusively meant for the grinding of chili, Coriander, Dry ginger, Black Pepper, Turmeric and Curry powders, on a large scale basis. These spices are ground in a two / three stage operation, depending on the fineness desired, i.e. The breaking of the Turmeric in a large hole screen for the first operation, and the subsequent fine grinding done in a fine hole screen for the second and third operation. We give here below production figures for the same.

Construction of Dry & Wet pulverizer

Dry & Wet pulverizer Made from heavy duty Mild Steel fabricated body. Aluminum Grinding Chamber lined with serrated wear Steel plates, which protects the body from wear and tear. Grinding done by a set of Fixed better on a balanced rotor. A screen classifier forms the lower half of the grinding chamber.
Available Models of Dry & Wet pulverizer

Model No	Jas 1102	Jas 1103
Chamber Size in inch in mm	Ø 8 X 4 Width Ø 200 X 100 Width	Ø 8 X 8 Width Ø 200 X 200 Width
Motor H.P.( KW)	1 ( 0.75 KW)	2 (1.50 KW)
Pole	2 Pole	2 Pole
RPM	2800	2800
Size of machine approximate	56 X 32 X 77 CM 46 Kg	62 X 32X 77 CM 65 KGs